Tributaries

Bring it all together

Model UHD48

by

Tributaries UHD48 48G HDMI cables were designed, built and tested to conform to the new HDMI 2.1 specification.  Strength and protection were built into every connector with Tributaries Full Body Armor Shielding. The Tributaries T-Grip stays put in the precise location even when installed in a moveable display. The UHD48 delivers Dynamic HDR, resolutions of 8K60, 4K120 and 10K; supports eARC, Quick Media Switching (QMS), Auto Low Latency Mode (ALLM), Variable Refresh Rates (VRR) and Quick Frame Transport (QFT). Get it all with Tributaries UHD48 48G Ultra HMDI cables installed in your system

The UHD48 Series Passive HDMI cable is stocked in each in lengths from 1/2 meter – 7 meters

Model PG

by

All Tributaries Phono Ground cables are assembled by hand in Orlando, Florida. The PG is comprised of a stranded flexible 20AWG OFC cable terminated with gold plated brass spade lugs. The spade lugs fit any ground terminal posts that are 4.0mm or smaller and are soldered-on to prevent problems due to intermittent connections. Stranded for flexibility and hand made in the USA.

The Tributaries Phono Ground cable is stocked in each. PG cables are available in ½ meter to 4 meter lengths with custom lengths available.

Model 4PC

by

All Series 4 audio cables are assembled by hand in Orlando, Florida. The Series 4 phono cable set is comprised of a S4 Single-Ended RCA audio cable and ground wire. Series 4 Single-Ended RCA cables begin with ultra-pure highly conductive oxygen free copper (HC-OFC) developed specifically for audio applications. Each conductor is a solid single gauge wire chosen to support multiple frequencies and to prevent grainy distortion caused by stranded wire. Tributaries Twin-Axial cable design is perfect for unbalanced analog audio systems. In the Twin-Axial design there are dedicated conductors with equal impedance for positive and negative signals. The signal conductors are wrapped with dual shielding to keep noise from reaching the single path. The ground wire is a flexible 20AWG stranded wire terminated with a gold plated spade lug that will fit ground posts that are 4mm and smaller. The Series 4 Single-Ended RCA cable is a high performance cable that looks as good as it sounds

The Series 4 Phono cable set is stocked as a pair plus one ground wire. Phono cable sets are available in ½ meter to 4 meter lengths with custom lengths available.

Model 6PC MKII

by

All Series 6 phono cables are meticulously assembled by hand in Orlando, Florida. The Series 6 MKII phono cable set is comprised of a S6 Single-Ended RCA audio cable and ground wire. The Series 6 audio cables begin with ultra-pure highly conductive oxygen free copper (HC-OFC) developed specifically for audio applications. Each conductor is engineered with dual solid gauge wires that are mathematically and tonally chosen to support low, mid and high frequencies for a natural sounding cable. Individually insulating each wire yields zero strand interaction and better sound quality. Unbalanced analog audio systems will benefit from using Tributaries Twin-Axial cable design. The precision twisted Twin-Axial design has dedicated conductors for the positive signal and negative return signal plus a heavy shield that is connected to the source end only. In this design the shield will capture any induced interference sending it to ground at the source end thereby isolating noise away from the input stage of the load. The ground wire is a flexible 20AWG stranded wire terminated with a gold plated spade lug that will fit ground posts that are 4mm and smaller. This configuration ensures a clear signal transfer with overall noise rejection as close to balanced as possible. The end result is a neutral sounding cable.

The Series 6 MKII Phono cable set is stocked as a pair plus one ground wire. Phono cable sets are available in ½ meter to 4 meter lengths with custom lengths available.

Model 8PC MKII

by

All Series 8 phono cables are meticulously assembled by hand in Orlando, Florida. The Series 8 Mark II phono cable set is comprised of a Series 8 Mark II Single-Ended RCA audio cable paired with a 14AWG silver-plated PCCC 14 AWG ground wire. Series 8 audio cable is engineered with extremely high grade linear crystal copper (LC-OFC) developed specifically for audio applications.  Tributaries LC-OFC is carefully drawn to produce a low crystal volume per foot resulting in less signal loss and distortion. Conductors consist of multiple solid gauges that are mathematically and tonally chosen to support low, mid and high frequencies for a natural sounding cable. Individually insulating each conductor yields zero strand interaction and better sound quality. Unbalanced analog audio systems will benefit from using Tributaries Twin-Axial cable design. The precision-twisted Twin-Axial design has dedicated conductors for the positive signal and negative return signal plus a heavy shield that is connected to the source end only. In this design the shield will capture any induced interference sending it to ground at the source end thereby isolating noise away from the input stage of the load. The ground wire is terminated with a gold-plated spade lug that will fit ground posts that are 4mm and smaller. This configuration ensures a clear signal transfer with overall noise rejection as close to balanced as possible. The end result is a dead-quiet neutral sounding cable that accurately produces the sound of live music

 

The Series 8 Mark II phono cable set is stocked as an RCA pair plus one ground wire. Phono cable sets are available in ½ meter to 4 meter lengths with custom lengths available.

Model 4Y

by

All Series 4 Y Adapter cables are assembled by hand in Orlando, Florida. The Series 4 Y Adapter cable is an audio splitter that comes in 2 configurations. The FMM is a cable with one female RCA split to two male RCA connectors. The MFF is a cable with one male RCA split to two female RCA connectors. 4Y adapter cables begin with ultra-pure highly conductive oxygen free copper (HC-OFC) developed specifically for audio applications. Tributaries Twin-Axial cable design is perfect for unbalanced analog audio systems. In the Twin-Axial design there are dedicated conductors with equal impedance for positive and negative signals. The signal conductors are wrapped with dual shielding to keep noise from reaching the single path. Conductors are solid gauge to prevent grainy distortion caused by stranded wire. The Series 4 Y Adapter cable is high performance cable that looks as good as it sounds

Available in two configurations: FMM and MFF. The Series 4 Adapter Y cable is stocked in 12 inch lengths and sold in each