• Skip to primary navigation
  • Skip to main content
  • Skip to footer
Tribuataries

Tribuataries

Bring it all together

MENUMENU
  • Products
    • Audio
      • Balanced
      • Single-ended
      • Subwoofer
      • Phono Preamp Cables
      • Y Adapter
    • Speaker Cables
      • Bi-wire
      • Speaker Cables
      • UL Rated
      • Jumper Cables
    • Digital
      • USB Cable
      • Optical
      • S/PDIF
    • HDMI
      • 18Gbps HDMI
      • 18Gbps Active HDMI
    • Power
      • CABLES
      • Conditioners
      • In Wall
  • Design
  • About
  • Dealers
  • Clarus
  • Login
    • Dealer Login
    • SalesRep Login

Best Basic "go-to" Audio Cable

Model 2YP

November 22, 2018 by

The Series 2 Portable Electronics Y Adapter cables enable you to connect your PCs sound card or a portable audio source, like an IPod® with a 1/8” mini stereo plug to your home stereo system with left/right RCA audio inputs. There are 2 configurations available. The MFF is a short nine inch cable with one male 3.5mm stereo mini plug split to two female RCA connectors.  The MMM version is configured with one male 3.5mm stereo mini plug split to two male RCA connector and is available in lengths of 1meter, 2meter and 3meter. Series 2 uses ultra-pure oxygen-free copper (OFC) developed specifically for audio applications. Conductors are solid gauge to prevent grainy distortion caused by stranded wire. The Series 2 Y Adapter’s light weight and flexible design is 100% shielded to ensure low noise and provide two channel separation for maximum stereo effect.

Available in two configurations: 9 inch MFF and 1m, 2m & 3m MMM.

The Series 2 Portable Electronics Y Adapter cables are sold in each

Model 2Y

November 22, 2018 by

The Series 2 Y Adapter cable is an audio splitter that comes in 2 configurations. The FMM is a cable with one female RCA split to two male RCA connectors.  The MFF is a cable with one male RCA split to two female RCA connectors.  Series 2 uses ultra-pure oxygen-free copper (OFC) developed specifically for audio applications. Conductors are solid gauge to prevent grainy distortion caused by stranded wire. The nine inch light weight and flexible design provides ease of installation. The Series 2 Y Adapter is 100% shielded to keep noise from entering the audio signal.

 Available in two configurations FMM and MFF.

The Series 2 Adapter Y cable is stocked in 9 inch lengths and sold in each

Model 2S

November 22, 2018 by

All Series 2 audio cables are assembled by hand in Orlando, Florida. The Series 2 Subwoofer Mono cables are designed to work in Low Frequency Effects (LFE) Subwoofer outputs of a pre-amp or receiver. Series 2 uses ultra-pure oxygen-free copper (OFC) developed specifically for audio applications. Since stranded wire supports higher frequencies and cause distortion, Series 2 uses a single solid-gauge wire chosen to support low frequency bass signals. Utilizing Tributaries Twin-Axial cable design with dedicated conductors of equal impedance for positive and negative signals the Series 2 RCA cables will benefit the performance of any analog audio system. The light weight and flexible design provides ease of installation. The Series 2 LFE Subwoofer mono cable is Tributaries entry level. Packed with performance, Series 2 will beat any similarly priced Subwoofer mono cable available.

The Series 2 Subwoofer cable is stocked in mono cables in lengths from 1 meter to 4 meter lengths with custom lengths available.

Model 2AD

November 22, 2018 by

All Series 2 audio cables are meticulously assembled by hand in Orlando, Florida. The Series 2 Digital Audio cables begin with ultra-pure oxygen free copper (OFC) developed specifically for audio applications. To maintain a consistent 75 Ohm impedance, the coaxial Series 2 S/PDIF Digital Audio cable’s 24AWG center conductor is surrounded by a perfectly concentric layer of PE dielectric. Dual shielding blocks noise from entering the signal path. Tributaries Series 2 precision 75 Ohm engineering provides accurate digital audio performance.

The Series 2 Digital Audio cable is stocked in each in lengths from ½ meter to 4 meter lengths with custom lengths available.

Model 2A

November 22, 2018 by

All Series 2 audio cables are assembled by hand in Orlando, Florida. The Series 2 Single-Ended RCA cables begin with ultra-pure oxygen free copper (OFC) developed specifically for audio applications. Conductors are solid gauge to prevent grainy distortion caused by stranded wire. Utilizing Tributaries Twin-Axial cable design with dedicated conductors of equal impedance for positive and negative signals the Series 2 RCA cables will benefit the performance of any unbalanced analog audio system. The light weight flat and flexible design provides ease of installation. The Series 2 Single-Ended RCA audio cable is Tributaries entry level. Packed with performance, Series 2 will beat any similarly priced audio cable available.

The Series 2 Single-Ended Audio cable is stocked in pair cables in lengths from ½ meter to 4 meter lengths with custom lengths available

Footer

  • Audio Cables
  • Speaker
  • Digital Cables
  • HDMI
  • Power
  • Design Principles
  • Dealer Locator
  • About
  • Dealer Login

Tributaries Cable
6448 Pinecastle Blvd. Suite 101
Orlando, FL 32809

Phone: (888) 554-2514 or
(407) 855-0497
Fax: (800) 553-1366 or
(407) 855-2482
Sales: sales@tributariescable.com

© 2021 Gordon J Gow Technologies, Inc., All rights reserved