• Skip to primary navigation
  • Skip to main content
  • Skip to footer
Tributaries

Tributaries

Bring it all together

MENUMENU
  • Products
    • Audio
      • Balanced
      • Single-ended
      • Subwoofer
      • Phono Preamp Cables
      • Y Adapter
    • Speaker Cables
      • Bi-wire
      • Speaker Cables
      • UL Rated
      • Jumper Cables
    • Digital
      • USB Cable
      • Optical
      • S/PDIF
    • HDMI
      • 48GBPS ULTRA HDMI
      • 48GBPS AOC HDMI
      • 18Gbps HDMI
      • 18Gbps Active HDMI
      • USB Voltage Inserter
    • Power
      • CABLES
      • Conditioners
      • In Wall
  • Design
  • About
  • Dealers
  • Clarus
  • Login
    • Dealer Login
    • SalesRep Login

High Performance Audio Cable

Model 4Y

August 14, 2020 by

All Series 4 Y Adapter cables are assembled by hand in Orlando, Florida. The Series 4 Y Adapter cable is an audio splitter that comes in 2 configurations. The FMM is a cable with one female RCA split to two male RCA connectors. The MFF is a cable with one male RCA split to two female RCA connectors. 4Y adapter cables begin with ultra-pure highly conductive oxygen free copper (HC-OFC) developed specifically for audio applications. Tributaries Twin-Axial cable design is perfect for unbalanced analog audio systems. In the Twin-Axial design there are dedicated conductors with equal impedance for positive and negative signals. The signal conductors are wrapped with dual shielding to keep noise from reaching the single path. Conductors are solid gauge to prevent grainy distortion caused by stranded wire. The Series 4 Y Adapter cable is high performance cable that looks as good as it sounds

Available in two configurations: FMM and MFF. The Series 4 Adapter Y cable is stocked in 12 inch lengths and sold in each

Model 4SY

November 22, 2018 by

All Series 4 audio cables are assembled by hand in Orlando, Florida. Series 4 Subwoofer Y cables are designed to work with Subwoofer that have left and right inputs and where LFE is not available. Series 4 uses ultra-pure highly conductive oxygen free copper (HC-OFC) developed specifically for audio applications. Since stranded wire supports higher frequencies and cause distortion, Series 4 uses a single solid-gauge wire chosen to support low frequency bass signals. Tributaries Twin-Axial cable design has dedicated conductors with equal impedance for positive and negative signals. The signal conductors are wrapped with dual shielding to keep noise from reaching the single path. The Series 4 Subwoofer Y provides a high performance bass cable that looks as good as it sounds.

The Series 4 Subwoofer cable is stocked in Y-cables in lengths from 1 meter to 4 meter lengths with custom lengths available.

Model 4SP14

November 22, 2018 by

All Series 4 audio cables are meticulously assembled by hand in Orlando, Florida. Series 4 UL Rated Speaker cable is designed as a step-up performance level to standard 14/2 which is typically installed inside the wall to speakers. Typical 14/2 is made of low cost standard grade copper that is stranded for flexibility. The problem with stranded wire is the signal jumps from strand to strand in an undesirable, unpredictable manner which causes audible distortion. SP414 is engineered with ultra-pure highly conductive oxygen-free copper (HC-OFC) developed specifically for audio applications. Two 14AWG conductors are insulated dual-gauge construction for improved sound quality while parallel in arrangement to eliminate magnetic distortion. All-in-all the 4SP14 UL rated speaker cable sound as good as they look without breaking the bank

The Series 4 Speaker cable is stocked in each in 200 foot spools and terminated in 4 foot to 12 foot lengths with custom lengths available.

 

Model 4SP

November 22, 2018 by

All Series 4 audio cables are meticulously assembled by hand in Orlando, Florida. Series 4 Star-Quad Speaker cables begin with ultra-pure highly conductive oxygen-free copper (HC-OFC) developed specifically for audio applications. Two 12AWG speaker conductors are the result of combining a 16AWG and 14AWG conductors opposite each other in a 4 conductor Star-Quad speaker arrangement. In the Star-Quad design Magnetic distortion is canceled by twisting strands clockwise and then wrapping the bundles counter-clockwise around one insulated large solid conductor.  Tributaries Series 4 Star-Quad design results in a high performance speaker cable that looks as good as it sounds

The Series 4 Star-Quad Speaker cable is stocked in each in lengths from 4 foot to 12 foot lengths with custom lengths available.

Model 4S

November 22, 2018 by

All Series 4 audio cables are assembled by hand in Orlando, Florida. Series 4 Subwoofer Mono cables are designed to work in Low Frequency Effects (LFE) Subwoofer outputs of a pre-amp or receiver. Series 4 uses ultra-pure highly conductive oxygen free copper (HC-OFC) developed specifically for audio applications. Since stranded wire supports higher frequencies and cause distortion, Series 4 uses a single solid-gauge wire chosen to support low frequency bass signals. Tributaries Twin-Axial cable design has dedicated conductors with equal impedance for positive and negative signals. The signal conductors are wrapped with dual shielding to keep noise from reaching the single path. The Series 4 LFE Subwoofer provides a high performance bass cable that looks as good as it sounds.

The Series 4 Subwoofer cable is stocked in mono cables in lengths from ½ meter to 4 meter lengths with custom lengths available.

Model 4PC

August 17, 2020 by

All Series 4 audio cables are assembled by hand in Orlando, Florida. The Series 4 phono cable set is comprised of a S4 Single-Ended RCA audio cable and ground wire. Series 4 Single-Ended RCA cables begin with ultra-pure highly conductive oxygen free copper (HC-OFC) developed specifically for audio applications. Each conductor is a solid single gauge wire chosen to support multiple frequencies and to prevent grainy distortion caused by stranded wire. Tributaries Twin-Axial cable design is perfect for unbalanced analog audio systems. In the Twin-Axial design there are dedicated conductors with equal impedance for positive and negative signals. The signal conductors are wrapped with dual shielding to keep noise from reaching the single path. The ground wire is a 16AWG stranded wire terminated with a gold plated spade lug that will fit ground posts that are 4mm and smaller. The Series 4 Single-Ended RCA cable is a high performance cable that looks as good as it sounds

The Series 4 Phono cable set is stocked as a pair plus one ground wire. Phono cable sets are available in ½ meter to 4 meter lengths with custom lengths available.

  • Go to page 1
  • Go to page 2
  • Go to page 3
  • Go to Next Page »

Footer

  • Audio Cables
  • Speaker
  • Digital Cables
  • HDMI
  • Power
  • Design Principles
  • Dealer Locator
  • About
  • Dealer Login

Tributaries Cable
7022 TPC Drive Ste 500
Orlando, FL 32822

Phone: (888) 554-2514 or
(407) 855-0497
Sales: sales@tributariescable.com

© 2023 Gordon J Gow Technologies, Inc., All rights reserved