• Skip to primary navigation
  • Skip to main content
  • Skip to footer
Tributaries

Tributaries

Bring it all together

MENUMENU
  • Products
    • Audio
      • Balanced
      • Single-ended
      • Subwoofer
      • Phono Preamp Cables
      • Y Adapter
    • Speaker Cables
      • Bi-wire
      • Speaker Cables
      • UL Rated
      • Jumper Cables
    • Digital
      • USB Cable
      • Optical
      • S/PDIF
    • HDMI
      • 48GBPS ULTRA HDMI
      • 18Gbps HDMI
      • 18Gbps Active HDMI
    • Power
      • CABLES
      • Conditioners
      • In Wall
  • Design
  • About
  • Dealers
  • Clarus
  • Login
    • Dealer Login
    • SalesRep Login

High Performance Audio Cable

Model 4BW

November 22, 2018 by

All Series 4 audio cables are meticulously assembled by hand in Orlando, Florida. Series 4 Bi-Wire Speaker cables begin with ultra-pure highly conductive oxygen-free copper (HC-OFC) developed specifically for audio applications.  Six stranded bundles are constructed by twisting strands clockwise and then wrapping the bundles counterclockwise around one insulated large solid conductor canceling magnetic fields thus reducing distortion. Two 16AWG conductors are designed for connection to the high frequency loudspeaker driver terminals while two 14AWG conductors are designed for connection to the low frequency driver terminals.  Tributaries Series 4 Star-Quad design results in a high performance speaker cable that looks as good as it sounds.

The Series 4 Star-Quad Bi-Wire Speaker cable is stocked in each in lengths from 4 foot to 12 foot lengths with custom lengths available.

Model 4BA

November 22, 2018 by

Available in various lengths to meet your requirements.

The Series 4 Star-Quad Bi-Amp Speaker cable is stocked in each in lengths from 4 foot to 12 foot lengths with custom lengths available

 

Model 4AO

November 22, 2018 by

Tributaries Series 4 Fiber Optic cables are single mode plastic optical fiber made from 1mm crystal-clear fiber cores surrounded by a highly reflective cladding and a protective jacket. The cladding and jacket are applied in concentric layers during the drawing process to prevent damage to the fiber that may occur during a 2 step process. The constant thickness improves losses due to attenuation. The 4AO has highly polished termination ends that resemble the convex look of a camera lens to ensure maximum signal transfer. This procedure ensures less than 0.1dB loss at each termination

The Series 4 Toslink Fiber Optic cable is stocked in each in lengths from ½ meter to 10 meter

Model 4AD

November 22, 2018 by

All Series 4 audio cables are meticulously assembled by hand in Orlando, Florida. The Series 4 begin with ultra-pure highly conductive oxygen-free copper (HC-OFC) developed specifically for digital audio applications. To maintain a consistent 75 Ohm impedance, the coaxial Series 4 S/PDIF Digital Audio cable’s 22AWG center conductor is surrounded by a perfectly concentric layer of foamed PE dielectric. Dual shielding blocks noise from entering the signal path. Tributaries Series 4 precision 75 Ohm engineering provides accurate digital audio performance.

The Series 4 Digital Audio cable is stocked in each in lengths from ½ meter to 4 meter lengths with custom lengths available.

Model 4ABY

August 14, 2020 by

All Series 4 balanced Y cables are assembled by hand in Orlando, Florida. Series 4 Balanced Y cables are configured FMM; with a single female XLR connector split to two male XLR connectors. 4ABY cables begin with ultra-pure highly conductive oxygen free copper (HC-OFC) developed specifically for audio applications. Conductors are solid gauge to prevent grainy distortion caused by stranded wire. Tributaries precision twisted Twin-Axial cable design is perfect for balanced analog audio systems. In the Twin-Axial design there are dedicated conductors with equal impedance for positive and negative signals. The signal conductors are wrapped with dual shielding to keep noise from reaching the single path. To reduce signal hum during connection the Tributaries Series 4 XLR connectors have the female ground (pin 1) placed forward in the shell so the ground connects first. The Series 4 balanced Y adapter cable is high performance cable that looks as good as it sounds

Available in FMM configuration, the Series 4 Balanced Y cable is stocked in 12 inch lengths and sold in each.

Model 4AB

November 22, 2018 by

All Series 4 audio cables are assembled by hand in Orlando, Florida. Series 4 balanced audio cables begin with ultra-pure highly conductive oxygen free copper (HC-OFC) developed specifically for audio applications. Conductors are solid gauge to prevent grainy distortion caused by stranded wire. The Series 4 balanced cables are a precision twisted balanced in design. Dedicated conductors with equal impedance for positive and negative signals. The signal conductors are wrapped with dual shielding to keep noise from reaching the single path. To reduce signal hum during connection the Tributaries Series 4 XLR connectors have the female ground (pin 1) placed forward in the shell so the ground connects first. The Series 4 balanced cable is high performance cable that looks as good as it sounds

The Series 4 Balanced Audio cable is stocked in pair and mono cables in lengths from ½ meter to 4 meter lengths with custom lengths available.

  • « Go to Previous Page
  • Go to page 1
  • Go to page 2
  • Go to page 3
  • Go to Next Page »

Footer

  • Audio Cables
  • Speaker
  • Digital Cables
  • HDMI
  • Power
  • Design Principles
  • Dealer Locator
  • About
  • Dealer Login

Tributaries Cable
6448 Pinecastle Blvd. Suite 101
Orlando, FL 32809

Phone: (888) 554-2514 or
(407) 855-0497
Fax: (800) 553-1366 or
(407) 855-2482
Sales: sales@tributariescable.com

© 2022 Gordon J Gow Technologies, Inc., All rights reserved